Dynex DX-E401 - Manual (Page 36)

36
Using the Configuration Menu (continued)
Tools > Time
Time Zone Select the Time Zone from the pull-down menu.
Daylight
Saving
To select Daylight Saving time manually, select enabled or dis-
abled, and enter a start date and an end date for daylight saving
time.
Set the Time To manually input the time, enter the values in these fields for
the Year, Month, Day, Hour, Minute, and Second. Click Set Time.
Default
NTP Server NTP is short for Network Time Protocol. NTP synchronizes com-
puter clock times in a network of computers.
This field is optional.
The system time is the time used by the DX-E401 for scheduling services. You can
manually set the time or connect to a NTP (Network Time Protocol) server. If an NTP
server is set, you will only need to set the time zone. If you manually set the time, you
may also set Daylight Saving dates and the system time will automatically adjust on
those dates.