Dynex DX-E401 - Manual (Page 29)

29
Using the Configuration Menu (continued)
Advanced > Filters > IP Filters
Filters are used to deny or allow LAN (Local Area Network) computers from accessing
the Internet. The DX-E401 can be setup to deny internal computers by their IP or MAC
addresses. The DX-E401 can also block users from accessing restricted web sites.
This is the schedule of time when the IP Filter will be enabled. Schedule
Select the protocol type Protocol Type
Use IP Filters to deny LAN IP addresses from accessing the
Internet. You can deny specific port numbers or all ports for
the specific IP address.
IP Filters
The single port or port range that will be denied access to the
Internet.
Port
The IP address of the LAN computer that will be denied
access to the Internet.
IP