Dynex DX-E401 - Manual (Page 15)

15
Using the Configuration Wizard (continued)
Static IP Address
If you selected Static IP Address, you will see the following page.
Enter in the IP address infor-
mation provided to you by your
ISP. You will need to enter in
WAN IP Address, WAN Subnet
Mask, WAN Gateway, and Pri-
mary DNS.
Click Next.
PPPoE
If you select PPP over Ethernet (PPPoE), you will see the following page.
Enter in the username and
password provided to you by
your ISP.
Enter in the Service Name if
your ISP uses a Service Name
for the PPPoE connection.
Click Next.
NOTE: Please be sure to remove any existing PPPoE client software installed
on your computers.