Dynex DX-E401 - Manual (Page 35)

35
Using the Configuration Menu (continued)
Tools> Admin
At this page, the DX-E401 administrator can change the system password. There are
two accounts that can access the Cable/DSL Router’s Web-Management interface.
They are admin and user. Admin has read/write access while user has read-only access.
User can only view the settings but cannot make any changes.
Remote Management Remote management allows the DX-E401 to be configured
from the Internet by a web browser. A username and password is still required to access
the Web-Management interface. In general, only a member of your network can browse
the built-in web pages to perform Administrator tasks. This feature enables you to per-
form Administrator tasks from the remote (Internet) host.
IP Address The Internet IP address of the computer that has access to the Cable/DSL
Router. If you input an asterisk (*) into this field, then any computer will be able to access
the Router. Putting an asterisk (*) into this field would present a security risk and is not
recommended.
Port The port number used to access the Cable/DSL Router.
Example http://x.x.x.x:8080 where x.x.x.x is the WAN IP address of the Cable/DSL
Router and 8080 is the port used for the Web-Mangement interface.
Administrator
Password
admin is the Administrator login name
Enter the password and enter again to confirm
User
Password
user is the User login name
Enter the password and enter again to confirm