Dynex DX-E401 - Manual (Page 23)

23
Using the Configuration Menu (continued)
Home > LAN
LAN is short for Local Area Network. This is considered your internal network. These are
the IP settings of the LAN interface for the DX-E401. These settings may be referred to as
Private settings. You may change the LAN IP address if needed. The LAN IP address is
private to your internal network and cannot be seen on the Internet.
Local Domain
Name This field is optional. Enter in the local domain name.
Subnet Mask The subnet mask of the LAN interface.
The default subnet mask is 255.255.255.0
IP Address The IP address of the LAN interface. The default IP address is:
192.168.0.1