Foxconn NFPIK8AA-8EKRS - Manual (Page 64)

56
Chapter 3 BIOS Description
Power Management Setup
ACPI Suspend Type (Default: Auto)
This item is used to set the energy saving mode of the ACPI function.
When you select “S1 (POS)” mode, the power will not shut off and the
supply status will remain as it is, in S1 mode the computer can be resumed
at any time. When you select “S3 (STR)” mode, the power will be cut off after
a delay period. The status of the computer before it enters STR will be saved
in memory, and the computer can quickly return to the previous status when
the STR function wakes. When you select “S1 & S3” mode, the system
will automatically select the delay time.
Power Management (Default: User Define)
This item is used to set the power management scheme.
Video Off Method (Default: DPMS Support)
This item is used to define the video off method. “Blank Screen” mode
means that after the computer enters power saving mode, only the monitor
will close, however, the vertical and horizontal scanning movement of the screen
continues. When you select the “V/H SYNC + Blank” mode the vertical and horizontal
scanning movement of screen stops when the computer enters power saving
mode. “DPMS Support” mode is a new screen power management system,
and it needs to be supported by the monitor you’re using.
HDD Power Down (Default: Disabled)
If HDD is not detected for the length of time specified in this field, the hard disk
drive will be powered down while all other devices remain active.
HDD Down In Suspend (Default: Disabled)
This item determines whether the hard disk drive will be turned off during
suspend mode.
Power Management Setup Menu