Foxconn NFPIK8AA-8EKRS - Manual (Page 36)

28
Chapter 2 Installation Instructions
Front Audio Connector: F_AUDIO
The audio port includes two parts – the Front Audio and Rear Audio. Their
priority is sequenced from high to low (Front Audio to Rear Audio). If head-
phones are plugged into the front panel of the chassis (using the Front Audio),
then the Line Out (Rear Audio) on the rear panel will not work. If you do not want
to use the Front Audio, pin 5 and 6, pin 9 and 10 must be short, and then the
signal will be sent to the rear audio port.
COM2 Connector: COM2
This motherboard attached a serial connector for your computer, you only need
connect it with cable, then link devices to cable port.
F_AUDIO
MIC_GND MIC_IN
+5VA MIC_PWR
AUD_RET_R AUD_OUT_R
EMPTY
AUD_OUT_L AUD_RET_L
1 2
9 10
NC
COM2
RLSD
SOUT
GND
RTS
RI Empty
CTS
DSR
DTR
SIN