Foxconn NFPIK8AA-8EKRS - Manual (Page 56)

48
Chapter 3 BIOS Description
Boot Up Floppy Seek (Default: Disabled)
If it is set to Enabled, BIOS will activate the floppy drive during the system boot,
and the drive’s indicator will flash after the activation. The magnetic head will
move back and forth from A to B.
Boot Up NumLock Status (Default: On)
This item defines if the keyboard Num Lock key is active when your system
is started. When it is set to On, the NumLock will be activated during system
startup. When it is set to Off, users can use the number keys instead of the
arrow keys to move the cursor.
Security Option (Default: Setup)
When it is set to Setup, a password is required to enter the CMOS Setup screen;
when it is set to System, a password is required not only to enter CMOS Setup,
but also to start up your PC.
Small Logo (EPA) Show (Default: Disabled)
This item allows you to enable or disable the EPA logo.
Init Display First (Default: PCI Slot)
This item is used to set which display device will be used first when your PC
starts up.
USB Keyboard/Mouse Support (Default: Enabled/Disabled)
These items are used to set whether the USB keyboard/mouse controller is en-
abled in a legacy operating system (such as DOS).
Intruder Detection (Default: Disabled)
This item is used to enable or disable the feature of recording the chassis
intrusion status and issuing a warning message if the chassis is once opened.
K8 Cool’n’ Quiet control (Default: Auto)
This feature is especially designed for AMD K8 processor, which provides a
CPU temperature detecting function to prevent your CPU from overheating
due to the heavy working loading.
Full Screen LOGO Show (Default: Enabled)
This item allows you to enable or disable the full screen logo.