Foxconn NFPIK8AA-8EKRS - Manual (Page 21)

13
Chapter 2 Installation Instructions
Memory
This motherboard includes four 184-pin slots with 266/333/400 MHz Dule Chan-
nel DDR DRAM interface (registered),You must install at least one memory
module to ensure normal operation. If you install two or more modules, they
must be the same speed. Mixing memory modules from different manufac-
tures are not recommended.
The processor (CPU) model supported by this motherboard includes a system
memory controller. Therefore overclocking the CPU frequency will also overclock
the system memory frequency. Please make sure your memory is rated to perform
at the overclocked frequency, e.g. if you overclock the CPU frequency to 240MHz, the
system memory should be capable of operating at 480MHz level or above, effec-
tively at DDR480 level or above.
DIMM1
DIMM2
DIMM3
DIMM4