Foxconn NFPIK8AA-8EKRS - Manual (Page 17)

9
Chapter 2 Installation Instructions
This motherboard supports Socket 940 for AMD Opteron TM processors running
at 1GHz for extremely high throughput (8.0GB/sec) and Hyper Transport TM
Technology.
1. Unlock the socket by pressing the le-
ver sideways, then lift it up to a 90 o
angle.
2. Align the cut edge to the gap in the base
of the socket. Carefully insert the CPU
into the socket until it fits in place.
When the CPU is in place, press it
firmly on the socket while you push
down the socket lever to secure the
CPU. The lever clicks on the side tab
to indicate that it is locked.
Installation of CPU
Follow these steps to install the CPU.
Push down the socket
lever to secure the CPU.
Cut edge
Gap in the base
Attention:
The CPU pins must be properly aligned with the holes in the
socket, otherwise the CPU may be damaged.