Foxconn NFPIK8AA-8EKRS - Manual (Page 44)

36
Chapter 2 Installation Instructions
BIOS TBL ENABLE Jumper: JP1
The system cannot boot, if the BIOS failed to be flashed in conventional flash
BIOS process. You will have no such worry when using the BIOS TBL function,
which is used to protect BIOS “Top Boot Block”. By using this function, the sys-
tem still can boot even if the flash BIOS fails and show some information to
recover the BIOS. To utilize this function, you just leave this jumper as short pin
2 and 3 with the jumper cap.
ROM TABLE SELECT Jumper: J1B1
This jumper is used to select between a user table and a safe table for booting
initialization parameters.
Safe mode
boot init table
(Default)
User mode
boot init
table
J1B1
BIOS TBL
Enabled
BIOS TBL
Disabled
JP1