Formax FD 4170 - Manual (Page 25)

21
● Cleaning sensor part
37
1. Press the “O” side of the power switch to turn off
the power and remove the power plug from the
outlet.
2. Open the safety cover. Spray the sensor part
with air spray which is available in the market or
gently clean it with a cotton swab to remove paper
powder.
3. Close the safety cover. Insert the power plug
into the outlet and then press the “I” side of the
power switch to turn on the power.
* If the machine does not restart after the above
actions were taken, contact our service person.
WARNING
Be sure to remove the power plug
from the outlet when working near
movable parts due to paper jam and
so on.
Sensor part
Open the safety cover. Spray the sensor with canned
air, or gently clean with a cotton swab to remove paper
dust residue.
If the burster still does not start, contact your Service
Technician.