Formax FD 4170 - Manual (Page 23)

19
How to deal with [ Err.1 ]
* If an excessive load is applied to the machine
during operation due to paper jam and so on,
the breaker works for safety and the machine
stops.
If this happens, follow the procedures below.
1. Press the “O” side of the power switch to turn off
the power.
WARNING
Be sure to remove the power plug
from the outlet when working near
movable parts due to paper jam and
so on.
2. Remove the paper remaining inside the machine
if there is any.
3. Confirm that there is no paper inside the machine
and press down the breaker button sticking out.
4. Press the “I” side of the power switch to turn on
the power. Now, the machine can restart.
* If the machine does not restart after the above
actions were taken, contact our service person.
35
If an excessive load is applied to the burster during operation due to paper jam, etc, the circuit breaker will
shut down the machine. If that happens, follow the instructions below.
How to deal with [ Err.1 ]
* If an excessive load is applied to the machine
during operation due to paper jam and so on,
the breaker works for safety and the machine
stops.
If this happens, follow the procedures below.
1. Press the “O” side of the power switch to turn off
the power.
WARNING
Be sure to remove the power plug
from the outlet when working near
movable parts due to paper jam and
so on.
2. Remove the paper remaining inside the machine
if there is any.
3. Confirm that there is no paper inside the machine
and press down the breaker button sticking out.
4. Press the “I” side of the power switch to turn on
the power. Now, the machine can restart.
* If the machine does not restart after the above
actions were taken, contact our service person.
35
How to deal with [ Err.1 ]
* If an excessive load is applied to the machine
during operation due to paper jam and so on,
the breaker works for safety and the machine
stops.
If this happens, follow the procedures below.
1. Press the “O” side of the power switch to turn off
the power.
WARNING
Be sure to remove the power plug
from the outlet when working near
movable parts due to paper jam and
so on.
2. Remove the paper remaining inside the machine
if there is any.
3. Confirm that there is no paper inside the machine
and press down the breaker button sticking out.
4. Press the “I” side of the power switch to turn on
the power. Now, the machine can restart.
* If the machine does not restart after the above
actions were taken, contact our service person.
35
How to deal with [ Err.1 ]
* If an excessive load is applied to the machine
during operation due to paper jam and so on,
the breaker works for safety and the machine
stops.
If this happens, follow the procedures below.
1. Press the “O” side of the power switch to turn off
the power.
WARNING
Be sure to remove the power plug
from the outlet when working near
movable parts due to paper jam and
so on.
2. Remove the paper remaining inside the machine
if there is any.
3. Confirm that there is no paper inside the machine
and press down the breaker button sticking out.
4. Press the “I” side of the power switch to turn on
the power. Now, the machine can restart.
* If the machine does not restart after the above
actions were taken, contact our service person.
35
If the burster still does not start, contact your Service
Technician.