Formax FD 4170 - Manual (Page 13)

9
■
Preparation Before Operation
1．Set bursting speed.
Ex.: Speed 1
Setting range: Speed 1 - 5
22
Speed
Number of sheet processed
[sheet/min.]
(A4 vertical)
1 / JOG 40
2 60
3 84
4 107
5 130
2．Feed the paper by pressing the JOG key to
perform test cut.
* If test cut does not succeed, check the cut size
setting.
3．Adjust the paper stopper and the paper guides
wider by approx. 0.12 inch than burst paper with a
hand.
4. Start the machine by pressing the START key.
* The machine automatically stops after processing.
5. Counter appears on the LCD while the machine
is working.
[ REFERENCE ]
The value on the counter is incremented as
[0→1→ .··· 9999].
The counter returns to “0” after “9999”.
PREPARATION BEFORE OPERATION
1. Set bursting speed
2. Feed paper by pressing the JOG button to perform a
test cut. If test cut is incorrect, check cut size setting.
3. On output side, adjust paper stopper and paper guides
to approximately 0.12 inch wider than the burst paper.
4. Start operation by pressing the START button. Machine
automatically stops after processing.
5. The counter will appear in the LCD display during
processing. The value of the counter is from 0 - 9999.
After 9999, counter will return to 0.
■
Pre par atio n B efo re Ope rat ion
1． Set bu rst ing sp eed .
Ex. : S pee d 1
Set tin g ra nge : S pee d 1 - 5
22
Spe ed
Num ber of sh eet pr oce sse d
[sh eet /m in. ]
(A4 ve rtic al)
1 / JO G 4 0
2 6 0
3 8 4
4 107
5 130
2． Fee d th e p ape r b y p res sin g th e J OG ke y to
per for m te st c ut.
* If te st c ut d oes no t s ucc eed , c hec k th e c ut s ize
se ttin g.
3． Adj ust th e p ape r s top per an d th e p ape r g uid es
wid er b y a ppr ox. 0. 12 inc h tha n b urs t p ape r w ith a
han d.
4. S tar t th e m ach ine by pr ess ing th e S TAR T ke y.
* T he mac hine au tom atic ally st ops af ter pr oce ssin g.
5. C oun ter ap pea rs on the LC D w hile th e m ach ine
i s w ork ing .
[ R EFE REN CE ]
The va lue on th e c oun ter is inc rem ent ed as
[0→ 1→ .·· · 9 999 ].
The co unt er r etu rns to “0 ” a fte r “9 999 ”.
■
Preparation Before Operation
1．Set bursting speed.
Ex.: Speed 1
Setting range: Speed 1 - 5
22
Speed
Number of sheet processed
[sheet/min.]
(A4 vertical)
1 / JOG 40
2 60
3 84
4 107
5 130
2．Feed the paper by pressing the JOG key to
perform test cut.
* If test cut does not succeed, check the cut size
setting.
3．Adjust the paper stopper and the paper guides
wider by approx. 0.12 inch than burst paper with a
hand.
4. Start the machine by pressing the START key.
* The machine automatically stops after processing.
5. Counter appears on the LCD while the machine
is working.
[ REFERENCE ]
The value on the counter is incremented as
[0→1→ .··· 9999].
The counter returns to “0” after “9999”.
Number of sheets
processed
(sheets per minute)
■
Preparation Before Operation
1．Set bursting speed.
Ex.: Speed 1
Setting range: Speed 1 - 5
22
Speed
Number of sheet processed
[sheet/min.]
(A4 vertical)
1 / JOG 40
2 60
3 84
4 107
5 130
2．Feed the paper by pressing the JOG key to
perform test cut.
* If test cut does not succeed, check the cut size
setting.
3．Adjust the paper stopper and the paper guides
wider by approx. 0.12 inch than burst paper with a
hand.
4. Start the machine by pressing the START key.
* The machine automatically stops after processing.
5. Counter appears on the LCD while the machine
is working.
[ REFERENCE ]
The value on the counter is incremented as
[0→1→ .··· 9999].
The counter returns to “0” after “9999”.
■
Preparation Before Operation
1．Set bursting speed.
Ex.: Speed 1
Setting range: Speed 1 - 5
22
Speed
Number of sheet processed
[sheet/min.]
(A4 vertical)
1 / JOG 40
2 60
3 84
4 107
5 130
2．Feed the paper by pressing the JOG key to
perform test cut.
* If test cut does not succeed, check the cut size
setting.
3．Adjust the paper stopper and the paper guides
wider by approx. 0.12 inch than burst paper with a
hand.
4. Start the machine by pressing the START key.
* The machine automatically stops after processing.
5. Counter appears on the LCD while the machine
is working.
[ REFERENCE ]
The value on the counter is incremented as
[0→1→ .··· 9999].
The counter returns to “0” after “9999”.
■
Preparation Before Operation
1．Set bursting speed.
Ex.: Speed 1
Setting range: Speed 1 - 5
22
Speed
Number of sheet processed
[sheet/min.]
(A4 vertical)
1 / JOG 40
2 60
3 84
4 107
5 130
2．Feed the paper by pressing the JOG key to
perform test cut.
* If test cut does not succeed, check the cut size
setting.
3．Adjust the paper stopper and the paper guides
wider by approx. 0.12 inch than burst paper with a
hand.
4. Start the machine by pressing the START key.
* The machine automatically stops after processing.
5. Counter appears on the LCD while the machine
is working.
[ REFERENCE ]
The value on the counter is incremented as
[0→1→ .··· 9999].
The counter returns to “0” after “9999”.
■
Preparation Before Operation
1．Set bursting speed.
Ex.: Speed 1
Setting range: Speed 1 - 5
22
Speed
Number of sheet processed
[sheet/min.]
(A4 vertical)
1 / JOG 40
2 60
3 84
4 107
5 130
2．Feed the paper by pressing the JOG key to
perform test cut.
* If test cut does not succeed, check the cut size
setting.
3．Adjust the paper stopper and the paper guides
wider by approx. 0.12 inch than burst paper with a
hand.
4. Start the machine by pressing the START key.
* The machine automatically stops after processing.
5. Counter appears on the LCD while the machine
is working.
[ REFERENCE ]
The value on the counter is incremented as
[0→1→ .··· 9999].
The counter returns to “0” after “9999”.
■
Preparation Before Operation
1．Set bursting speed.
Ex.: Speed 1
Setting range: Speed 1 - 5
22
Speed
Number of sheet processed
[sheet/min.]
(A4 vertical)
1 / JOG 40
2 60
3 84
4 107
5 130
2．Feed the paper by pressing the JOG key to
perform test cut.
* If test cut does not succeed, check the cut size
setting.
3．Adjust the paper stopper and the paper guides
wider by approx. 0.12 inch than burst paper with a
hand.
4. Start the machine by pressing the START key.
* The machine automatically stops after processing.
5. Counter appears on the LCD while the machine
is working.
[ REFERENCE ]
The value on the counter is incremented as
[0→1→ .··· 9999].
The counter returns to “0” after “9999”.