Englis h – Formax 6600 Series User Manual

Page 5

ENGLIS

PRECAUTIONS

Before using this system, thoroughly read the
operating instructions. In the European Union
an operator manual printed in the national
language(s) is supplied with the system. If it is
not, contact your authorized distributor.

Warning

• Before connecting check if the system is

suitable for the local mains voltage; refer to
the type plate.

Safety precautions

• This system is only to be operated by fully

trained personnel. The manufacturer accepts
no responsibility for injuries caused by
unauthorized operation.

• The opening of covers must be carried out

only by a skilled and authorized person who is
aware of the hazard involved. The system will
not operate with the covers opened.

• Keep long hair, fingers, jewellery, etc. away

from turning parts of the system.

• The socket outlet shall be installed near the

equipment and shall be easily accessible.

• The mains plug shall be connected only to a

socket outlet provided with a protective earth
contact.

• Over-current protection in the equipment also

relies on the branch circuit protection (max.
20 A).

• The following part(s) is (are) considered the

equipment disconnect device(s):
- power supply cord plug.
- 12-pole connector, located on the right-hand

side.

Used symbols

Warning, this symbol indicates a
wrong action which can cause a
hazard to health or damage the
system.
This symbol also means: read your
operator instruction.

Warning, this symbol indicates a
hazard to life because of high voltage.

Italic text: Additional information

1.1

Special national conditions

Denmark: In Denmark, certain types of Class 1
appliances may be provided with a plug not
establishing earthing continuity when inserted
into Danish socket-outlets. Be sure the
equipment makes contact with the protective
earthing of the socket outlet.
(Plug and socket outlet have to match!)
Japan: Provide an earthing connection before
the mains plug is connected to the mains. When
disconnecting the earthing connection, be sure
to disconnect after pulling out the mains plug
from the mains.

GENERAL

2.1

Understanding the machine

This machine is a sophisticated folding and
inserting system which can process large
quantities of mail rapidly and easily.
The settings of the system are recorded in so-
called jobs. These jobs can be programmed by
an authorized user.
As a special feature the system is equipped with

an AutoSet

function. The purpose of this

function is to start working as quickly as
possible.
The system consist of the following parts (see
figure below):

FlexFeed™

Collating area

IntelliDeck™

PowerFold™

Inserter

Present on deck

Stacker

Side exit