Formax 6600 Series - Manual (Page 24)

24
Exit settings overview
On the machine Exit 1 is the Stacker and Exit 2 is the Side exit.
Sorting Symbol Exit
Swap 1 Inserted envelopes are stacked until the stacker is full.
2 Inserted envelopes leave from the side exit when the
stacker is full.
When a stack of envelopes is removed from the full stacker, about ten envelopes will leave from the
side exit before the inserted envelopes are stacked at the stacker again.
Batching 1 Alternate batches of inserted envelopes are stacked or
leave from the side exit depending on the preset
counter.
2
The batch counter can be set from 1 to 250 in steps of one inserted envelop per exit. Default the batch
counter is set to 50.
DFC 1 Inserted envelopes with thickness equal to or greater
than the reference value are stacked.
2 Inserted envelopes with thickness smaller than the
reference value leave from the side exit.
1 Inserted envelopes with thickness smaller than the
reference value are stacked.
2 Inserted envelopes with thickness equal to or greater
than the reference value leave from the side exit.
1 Inserted envelopes with thickness equal to or smaller
than the reference value are stacked.
2 Inserted envelopes with thickness greater than the
reference value leave from the side exit.
1 Inserted envelopes with thickness greater than the
reference value are stacked.
2 Inserted envelopes with thickness equal to or smaller
than the reference value leave from the side exit.
OMR 1 Inserted envelopes are stacked according to the OMR
code.
2 Inserted envelopes leave from the side exit according to
the OMR code.
Off 1 All envelopes are stacked.
2 -
1 -
2 All envelopes leave from the side exit.