Formax 6600 Series - Manual (Page 47)

47
ENGLIS
H
Reading stop. Remove the documents,
check the matched number
and replace the set in the
feeder or complete the set
manually. Unmatched set 3 : 123
Reading error. Remove the documents.
Check the set and the used
OMR code. Replace the set in
the feeder or complete the set
manually. Sequence error. 3 : 124
Reading error. Remove the documents,
check the matched number
and replace the set in the
feeder or complete the set
manually. Wrong set sequence. 3 : 125
Reading error. Remove the documents and
check the used OMR code.
Adjust the reading head. Wrong parity in code. 3 : 126
Reading error. Remove the documents and
check the used OMR code
(flex-dongle). Undefined mark found 3 : 127
Reading error. Remove the documents and
check the used OMR code
(mark line distance). Wrong mark distance. 3 : 128
Reading error. Remove the documents and
check the used OMR code
(flex-dongle). Wrong numbers of marks 3 : 129
Reading error. Remove the documents.
Check the set and complete
the set manually. Wrong window position. 3 : 132
Too many sheets. Remove the documents.
Check the set and complete
the set manually. Set size exceeded. 3 : 134
Incomplete set. Remove the documents.
Check the set and complete
the set manually. Part of previous set. 3 : 135
error description suggested solution information Error code
Service assistance is needed for the error codes with the message “technical failure”. First write down
the error code, than switch the inserter off and on again, to verify system operation. When the error still
occurs contact your service organization.