Fluke Biomedical PS420 - Manual (Page 21)

Multiparameter Simulator
Controls and Terminals
11
Table 2. Controls and Terminals (cont.)
Item Name Description
E
CHANGE These keys are functional when the top line in the LCD window displays the up/down
arrows . They allow you to increment or decrement the current setting. The up
CHANGE arrow increases the preset codes by 1, while the down CHANGE arrow
decreases the preset codes by 1.
Keypad Soft Keys These keys have two functions: numeric and one-step selection of Simulator functions.
0 / STATUS Enters a numeric 0 to code line. Displays current parameter settings.
1 / TEMP Enters a numeric 1 to code line. Changes temperature.
2 / RATE Enters a numeric 2 to code line. Changes respiration rate.
3 / BASELINE Enters a numeric 3 to code line. Changes baseline resistance.
4 / STATIC Enters a numeric 4 to code line. Sets BP channels static levels.
5 / WAVEFORM Enters a numeric 5 to code line. Sets BP channels to BP waveforms.
6 / ZERO Enters a numeric 6 to code line. Sets BP channels to zero level.
7 / RATE Enters a numeric 7 to code line. Changes ECG rate for NSR.
8 / SIZE Enters a numeric 8 to code line. Changes ECG amplitude (lead II).
F
9 / NSR Enters a numeric 9 to code line. Selects Normal Sinus Rhythm (80 BPM).