Fluke Biomedical ProSim 4 - Manual (Page 36)

ProSim™ 4
Users Manual
26
How to Charge the Battery
The battery charge level is shown in the upper right corner of the display.

Shows when the ac/dc power supply is
connected

Shows the battery level when the Product
operates on the battery
The battery can be charged while it is in or out of the Product. The charge rate is
slower when the Product is energized and the battery charger is on. To charge
the battery:
1. As shown in Figure 22, connect the ac/dc power supply to the power
connector on the battery pack.
2. Connect the ac/dc power supply to a power source.
Battery LED
gne022.eps
Figure 22. External Battery Charging Connections
The battery charge LED on the battery pack shows red or green when the ac/dc
power supply is connected to the battery pack. When the LED is green, the
battery is charged.
When you have two or more battery packs, you can charge one battery externally
while you use the other to energize the Product.