Fluke Biomedical ProSim 4 - Manual (Page 17)

Vital Signs Simulator
How to Turn On the Product
7
How to Turn On the Product
Push  on the left side panel to turn on the Product. Push  for three
seconds to turn off the Product.
When the self test is complete and no errors are sensed, page 1 of the Home
screen in Figure 1 shows in the display. All Product simulations and tests are set
through the controls on the Home screen.
Page 1 Page 2
gne002.eps
Figure 1. Home Screen
Note
When page 1 or page 2 of the Home screen shows in the display, all
simulation outputs are disabled.
From page 1 of the Home screen, three pre-defined conditions for simulations
can be used to set all the simulation functions. These pre-defined conditions are
set when you touch Normal Adult, Hypertensive Adult, or Hypotensive Adult
on the display. The pre-defined simulation variables can not be changed. Table 7
lists the parameter values for each pre-defined simulation.