Fluke Biomedical ProSim 4 - Manual (Page 35)

Vital Signs Simulator
Maintenance
25
To prevent personal injury:
• Do not disassemble the battery.
• Batteries contain hazardous chemicals that can cause burns
or explode. If exposure to chemicals occurs, clean with
water and get medical aid.
• Do not put battery cells and battery packs near heat or fire.
Do not put in sunlight.
• Do not disassemble or crush battery cells and battery
packs.
To prevent possible electrical shock, fire, or personal injury:
• Remove the input signals before you clean the Product.
• Use only specified replacement parts.
• Have an approved technician repair the Product.
How to Clean the Product
 Caution
Do not pour fluid onto the Product surface; fluid seepage into
the electrical circuitry may cause the Product to fail.
Do not use spray cleaners on the Product; such action may
force the cleaning fluid into the Product and damage electronic
components.
Clean the Analyzer occasionally with a damp cloth and mild detergent. Try to
prevent the entrance of liquids.
Clean the adapter cables with the same precautions. Examine them for damage
and deterioration of the insulation. Examine the connections for integrity. Keep
the transducer adapter clean and dry.
Battery Maintenance
For peak battery performance, charge the Product to maximum charge once a
month. If the Product is not to be used for more than a month, keep it connected
to the charger.
Note
To get the specified performance, use the specified battery charger
that comes with this Product.
When the battery gets low a low battery message shows in the display.
When the battery discharges to a low level threshold, a warning message shows
in the display to indicate the NIBP function is disabled.