Fluke Biomedical RF303 - Manual (Page 34)

RF303
Operators Manual
2-10
Maintenance
Follow the recommendations below to keep the Analyzer in good working
condition.
Cleaning
Moisten a clean cloth with a mild solution of detergent and water only and
wipe the Analyzer clean.
W Caution
To avoid damaging the Analyzer, use only dilute, mild
detergent for cleaning.
Calibration
Calibrate the Analyzer every 12 months.
Replacing Fuses
The Analyzer contains two operator-replaceable fuses, rated as Type F, 3.15 A,
and 250 V. These fuses are in the two main supply lines.
You can replace one or both of these fuses by opening the fuse cover located
on the right panel. Refer to Figure 2-1 for a diagram of the fuse cover
assembly. If necessary, see “Instrument Familiarity”, to identify the fuse cover.