Fluke Biomedical RF303 - Manual (Page 30)

RF303
Operators Manual
2-6
Table 2-2. Battery Operating Status
Analyzer
Connected to ac
Power Source?
On/Off Switch
Setting
Power Source to
Analyzer
Instrument
Controls and
Measurement
Circuits
Battery Status
No On Battery Discharging
No Off No power Open circuit,
minimal leakage
Yes Off No power Charging
Yes On AC Charging
Battery Status Light
The battery status indicator light is labeled BATTERY STATUS . Table 2-3
shows status light displays and their corresponding conditions.
Table 2-3. Battery Status Light
Light Battery Condition
Flashing green Battery is being qualified (checked) with medium
charge or receiving full charge. Voltage is OK.
Steady green Maintenance charge voltage OK or battery
operation with voltage OK.
Flashing red and green Automatic shut-down is pending, battery is nearly
exhausted.
Flashing red Automatic shut-down is imminent.
Steady red When plugged in; indicates that the battery is not
charging and needs replacement by the Fluke
Biomedical Service Center
.
Note
The Analyzer should be charged overnight, when the battery is fully
drained.