Fluke Biomedical RF303 - Manual (Page 33)

Installation, Setup, and Maintenance
Installation and Setup
2
2-9
Note
The mechanical pin is removed from the CQM connector to disable
CQM during ESU generator output tests.
ESU Jumper Safety Lead
Part # 2772209
Color: Black
Quantity: Two
Both ends of these two short jumpers have fixed shroud 4mm banana plugs
and are used to configure the Analyzer for the IEC Type BF Tests 1 and 2,
which utilize the auxiliary HF load resistance
(200e). Both jumpers are
required to conduct these tests.
ESU CQM Safety Lead
Part # 2772180
Color: Clear with blue and yellow connectors
Quantity: One
One end of the test lead has two fixed shroud 4mm banana plugs to connect
across the Analyzer test load. The other end has a CQM style 2PIN connector
that plugs directly into the neutral (or dispersive) electrode jack on most ESU
panels.
Note
The mechanical pin is intact to enable the CQM function during CQM
testing. Do not use this lead for output testing.