Flowserve TRV5-40 - Manual (Page 6)

6
TRV 5-40
Type approval
TÜV. SWB/SHWS. 03–43
EG BAF-MUC 03 07 0388 004
DIN registry no. STW (STB) 7 906
Input/Output
CAN bus interface with current supply 8 – 36 V DC, short circuit protected
Temperature sensors
TRG 5-63
x Pt 00 to EN 6075
TRG 5-64
x Pt 00 to EN 6075
TRG 5-65, TRG 5-66
x Pt 00 to EN 6075
TRG 5-67
x Pt 00 to EN 6075
TRG 5-68
x Pt 00 to EN 6075
Temperature limit T
MAX
(°C) (cut-off temperature)
Min. adjustable limit value: 0°C
Max. adjustable limit value: 650°C
Indicators and adjustors
Red three-digit, seven-segment LED display for indicating limit values
Green three-digit, seven-segment LED display for indicating the actual value
3 Pushbuttons for limit settings
5 LEDs for internal status messages
Code switch with 0 poles for setting the node ID and baud rate
Code switch with 0 poles for configuring the system
Internal self-checking routine
Every 0 seconds
Fault response time
30 sec.
Power consumption
W
Fuse
Electronic thermal fuse T
MAX
85°C, hysteresis –K
Protection
IP 65 to EN 6059
Max. admissible ambient temperature
70°C
Technical Data