Flowserve TRV5-40 - Manual (Page 26)

6
Declaration of Conformity
We hereby declare that the equipment TRV 5-40 conforms to the following European guidelines:
n
LV guideline 73/3/EC version 93/68/EC
n
EMC guideline 89/336/EC version 93/68/EC
n
Pressure Equipment Directive (PED) 97/3/EC of 9 May 997.
Applied conformity assessment procedure: Annex III, Module B and D, verified by notified
body 055.
This declaration is no longer valid if modifications are made to the equipment without consultation
with us.
Bremen, 0 January 006
GESTRA AG
Dipl.-Ing. Lars Bohl
(Academically qualified engineer)
Quality Assurance Manager
Dipl.-Ing. Uwe Bledschun
(Academically qualified engineer)
Head of Design Dept.
Annex
– continued –
Decommissioning
First disconnect the temperature sensor TRG 5-6x and then withdraw the sensor lines from the cable
glands. Unplug the connecting plug and the connecting jack of the CAN bus lines and plug them
together.
Deinstall the temperature transmitter TRV 5-40.
If the CAN bus line is interrupted an alarm will be triggered.
Attention
Disposal
Deinstall the temperature transmitter TRV 5-40 and separate the waste materials in accordance with
the material specification. Electronic components (boards) must be disposed of separately.
For the disposal of the temperature transmitter TRV 5-40 observe the pertinent legal regulations con-
cerning waste disposal.