Q-See QSDF8204 - Manual (Page 22)

QSDF8204 Digital Video Recorder User Manual
22
STEP2 In Preset submenu, press "Enter" button to switch the preset point
needing to be reset.
STEP3
Press "ADJUST" button to enter PTZ mode.
STEP4 On the front panel, press "ZOOM", "FOCUS", "SPEED", "IRIS", "+"
(MENU) and "-" (PTZ) buttons to modify the position of the preset point.
STEP5
Press "UP", "DOWN", "RIGHT" and "LEFT" buttons to rotate the
Speed Dome.
STEP6
Press "ESC" button to come back to Preset menu.
STEP7 Press "SAVE" button to save the setting, and press "CANCEL" to
discard the setting.
Notice: how to use the presetting point:
6. COPY TO
Users can use the number keys to switch the preset point in PTZ mode. First
press "PTZ" button to enter PTZ mode, then press the number key such as "1", and the
Speed Dome will move to preset point 1.
You can use this option to copy the settings of this channel to all channels or
any other selected channel.
3.2.6 User Configuration
User Configuration is shown as Fig 3.16. The default username is Admin.
Administrator can add users, set users’ authorization and delete users.
Fig 3.16 User Configuration