beautypg.com

ETA Biopot User Manual

Page 42

background image

The lid cannot be

opened after the

steam has been

fully released

Safety valve

B2 is still in the up

position

Using a suitable tool

(e.g. skewer) push the safety

valve into the down position

A large amount of

steam is escaping

around the edge

of the outer body

Lid

B is not properly closed

Check the attachment of the lid

on the pressure cooker

Gasket

B5 is not in its place

Place the gasket in the correct

place in the lid

There are food remains on the

gasket

B5

Remove the gasket from the lid

and clean it (see Maintenance)

Gasket

B5 is worn out or

damaged

Replace the damaged gasket

with a new one of the same type

(see Maintenance)

Lid

B has been damaged (e.g.

by being dropped on the floor)

Contact the service department

Large amount of

steam is escaping

from safety valve

B2

The grommet

B3 is soiled (e.g.

food remains)

Remove the grommet from the

valve

and clean it (see Maintenance)

The grommet

B3 is worn out or

damaged

Replace the damaged grommet

with a new one of the same type

(see Maintenance)

large amount of

steam is escaping

from the pressure

limit valve

B4

The pressure limit valve

B4

is set in the position „

Pára

(Steam)

Set the limit valve to the position

Zavřeno (Closed)

The grommet

B12 is soiled (e.g.

food remains)

Take the grommet out of the

valve and clean it (see Mainte-

nance)

Grommet

B12 is worn out or

damaged

Replace the damaged grommet

with a new one of the same type

(see Maintenance)

The pressure

cooker is emitting

an unpleasant

odour

The cooking pot

C or the heating

plate

A3 are soiled

Check and if necessary clean

the contact surfaces of the

cooking pot and the heating

plate

If a serious malfunction occurs on the pressure cooker while it is cooking, the display on

the control panel will show one of the following error codes. If this occurs stop the cooking

process, disconnect the pressure cooker from the el. mains and contact the service

department without delay.

Error code

E1

E2

E3

E4

Malfunction Malfunction of the heat

sensor

Overheating of

the pressure

cooker

Malfunction of the pressure

limit valve

42

GB

/ 70