ETA Biopot User Manual
Page 37

Automatic cooking with a time delay
The pressure cooker can start the cooking process with a time delay, i.e. after the time you
have set has elapsed. In this way cooking is automatic without the need to do anything
else.
To set up cooking with a time delay do the following:
1) Select an appropriate programme by repeatedly pressing the
Menu button.
2) Set the time after which the pressure cooker should turn itself on by repeatedly pressing
the
Časovač (Timer) button. The display will show
0,5
, indicating 0.5 hour (i.e. 30
minutes), which is the shortest time interval. Every time the button is pressed the time is
increased by another 30 minutes up to the maximum period of 9.5 hours.
3) Press the
Start button to start the selected programme. The time on the display will
automatically decline by 0.1 hour intervals until it reaches zero after which the pre-
selected cooking programme will be started.
4) As soon as the temperature and pressure inside the pressure cooker start to rise the
safety valve
B2 will close the opening in the lid and prevent steam from escaping from
the pressure cooker. For safety reasons at this point the lid cannot be removed.
Do not
attempt to remove the lid by force!
5) After reaching the necessary pressure and temperature [the display will show the
message
Tlak (Pressure)] the preset time will start to countdown.
6) After the preset time has elapsed the programme will end (a sound will be made and the
display will show the message
End) and the food or speciality can be taken out of the
pressure cooker.
ATTENTION
- When working with the time delay never use ingredients that spoil rapidly such as fresh
milk, eggs, fruit, yoghurt, cheese, onion, etc. because they could spoil before the cooking
starts!
- During operation it is possible to view the progress of the programme on the display.
As the programme progresses the digits of the set time gradually decrease in 1 minute
increments.
- A selected time and programme can be ended at any time by pressing the
Zrušit
(Cancel) button.
Setting the cooking time manually
The pressure cooker makes it possible to manually set the length of time for which the food
will be cooked.
1) Repeatedly press the
Menu button to select the Volba vaření (Cooking selection)
button [the display will show a message
Doba-Tlak (Time-Pressure) and the symbol
].
2) Using the
Nastavení volby času vaření (Setting the cooking time) button
( + or – ) enter the desired cooking time. The lowest duration is 1 minute and that
maximum duration is 99 minutes.
3) Press the
Start button to start the selected programme.
4) As soon as the temperature and pressure inside the pressure cooker start to rise the
safety valve
B2 will close the opening in the lid and prevent steam from escaping from
the pressure cooker. For safety reasons at this point the lid cannot be removed.
Do not
attempt to remove the lid by force!
5) After reaching the necessary pressure and temperature [the display will show the
message
Tlak (Pressure)] the preset time will start to countdown.
37
GB
/ 70