beautypg.com

ETA Biopot User Manual

Page 36

background image

Check that the gasket

B5 is correctly seated in its place in the lid B. Set the pressure

control valve

B4 to the position „Pára (Steam)“. Hold the lid by the handle B1, place it

horizontally on to the outer body of the pressure cooker

A, pushing down on it lightly

while turning it in the clockwise direction until it can go no further. A properly secured lid

is indicated by an audible click sound.

Do not close the lid using excessive force! set

the steam pressure control valve

B4 to the position „Zavřeno (Closed)“ and check that

the safety valve

B2 is in the down position. Fully insert the end of the power cord D4 into

the connection socket of the pressure cooker

A8 and insert the plug into an electric power

socket.

Automatic cooking

When using the automatic cooking function you only need to select an appropriate cooking

programme and everything else will be electronically controlled.

1) Select an appropriate programme by repeatedly pressing the

Menu button.

2) Press the

Start button to start the selected programme [the display will show a flashing

symbol „

“ and the message

Vaření (Cooking)].

3) The pressure cooker will first heat up the inserted ingredients and liquids to the

appropriate temperature.

4) As soon as the temperature and pressure inside the pressure cooker start to rise the

safety valve

B2 will close the opening in the lid and prevent steam from escaping from

the pressure cooker. For safety reasons at this point the lid cannot be removed.

Do not

attempt to remove the lid by force!

5) After reaching the necessary pressure and temperature [the display will show the

message

Tlak (Pressure)] the preset time of the respective programme will start to

countdown (see table).

6) After the preset time has elapsed the programme will end (a sound will be made and the

display will show the message

End) and the food or speciality can be taken out of the

pressure cooker.

ATTENTION

- During the cooking process and while maintaining temperature, steam is released from

the limit valve

B4, which makes a characteristic „hissing“ sound. This event is completely

normal and it is not a reason for complaint.

- If while cooking you need to remove the lid for any reason (e.g. to add ingredients/to

season/to mix the food) it is always necessary to first reduce the pressure inside the

pressure cooker (i.e.

to release steam) and only then remove the lid. For mixing use the

spoon

D2, which you can place in the holder A6 while cooking. In this way the spoon will

always remain hygienically clean.

- During operation it is possible to view the progress of the programme on the display.

As the programme progresses the digits of the set time gradually decrease in 1 minute

increments.

- If after finishing cooking you need to keep the food warm (e.g. before serving) press the

button

Zrušit (Cancel) and then press the Udržování teploty (Keep warm) button (the

display will show the message

Ohřev (Heating) and the symbol

). The pressure

cooker automatically maintains the temperature in the range of approximately 60 – 70

°C.

- Never leave finished meals in the pressure cooker with the

Udržování teploty (Keep

warm) function turned on for longer than necessary. The meal could start to spoil.

- A selected programme can be ended at any time by pressing the

Zrušit (Cancel) button.

36

GB

/ 70