D-Link DIR-455 - Manual (Page 56)

52 D-Link DIR-455 User Manual
Section 3 - Configuration
ADMINISTRATOR
Enter and confirm the password that the
admin account will use to access the
router’s management interface.
REMOTE MANAGEMENT
Remote management allows the DIR-
455 to be configured from the Internet
using a web browser. A username and
password is still required to access the
Web-Management interface. Usually
only a member of your network can
browse the built-in web pages to perform
Administrator tasks. This feature enables
you to perform Administrator tasks from
the remote (Internet) host.
Enter the Internet IP address of the PC that has access to the Broadband Router. If you enter an asterisk (*)
in this field, then anyone will be able to access the Router. Adding an asterisk (*) into this field could present
a security risk and is not recommended.
This is the port number used to access the router. Example: 8080 is the port used for the Web-Management
interface.
Click Save Settings to save your changes, or click Don’t Save Settings to discard your changes.
Admin
The Admin page allows you to change the Administrator password and enable Remote Management. Admin has read/write access while
the user has read-only access. Only the admin has the ability to change both admin and user account passwords.
Admin Password:
Remote Management:
IP Allowed to Access:
Port: