D-Link DIR-455 User Manual

Page 16

Section 3 - Configuration

Choose this if your Internet connection automatically provides you with an IP Address. Most cable modems

use this type of connection. See page 16 for information about how to configure this type of connection.

Choose this option if your Internet connection requires a username and password to connect. Most DSL modems

use this style of connection. See page 17 for information about how to configure this type of connection.

Choose this option if your Internet connection requires Point-to-Point Tunneling Protocol (PPTP). See page

18 for information about how to configure this type of connection.

Choose this option if your Internet connection requires Layer 2 Tunneling Protocol (L2TP). See page 19 for

information about how to configure this type of connection.

Choose this connection if you have installed a SIM card into the DIR-455. See page 20 for information about

how to configure this type of connection.

Choose this option if your Internet Setup Provider provided you with IP Address information that has to be

manually configured. See page 21 for information about how to configure this type of connection.

DHCP Connection

(Dynamic IP Address):

Username / Password

Connection (PPPoE):

Username / Password

Connection (PPTP):

Username / Password

Connection (L2TP):

3G Connection:

Static IP Address

Connection:

The subsequent configuration pages will differ depending on the selection you make on this page.