D-Link DIR-455 - Manual (Page 48)

44 D-Link DIR-455 User Manual
Section 3 - Configuration
MAC Address Filter
MAC FILTERING SETTINGS
Select this box to enable Mac Filtering.
Wireless and wired clients with C selected
can connect to this device and allow/
deny connections from unspecified MAC
addresses.
Wireless clients with A selected can
associate to the wireless LAN; and allow/
deny connections from unspecified MAC
addresses.
MAC FILTERING RULES
Identifies the rule.
Specify the MAC Address of the computer
to be filtered.
Specify the last section of the IP address.
Click Trigger to configure Wake On LAN.
If this box is selected, the rule will follow the connection control setting specified in MAC filtering settings.
If this box is selected, the rule will follow the connection control setting specified in MAC filtering settings.
Click Save Settings to save your changes, or click Don’t Save Settings to discard your changes.
MAC Address Control:
Connection Control:
Association Control:
ID:
MAC Address:
IP Address:
Wake On LAN:
C:
A:
The MAC (Media Access Controller) Address Filter option is used to control network access based on the MAC Address of the network
adapter. A MAC address is a unique ID assigned by the manufacturer of the network adapter. This feature can be configured to ALLOW
or DENY network/Internet access.