D-Link DIR-455 User Manual

Page 29

Section 3 - Configuration

Indicates the channel setting for the DIR-

455. By default the channel is set to 11.

This can be changed to fit the channel

setting for an existing wireless network or

to customize your wireless network. Click

Auto Channel Scan to automatically

select the channel that it will operate on.

This option is recommended because

the router will choose the channel with

the least amount of interference.

Select

Invisible if you do not want the

SSID of your wireless network to be

broadcasted by DIR-455. The SSID

of your router will not be seen by Site

Survey utilities. Therefore while setting

up your wireless clients, you will have

to manually enter your SSID to connect

to the router.

WIRELESS SECURITY MODE

This device supports three wireless security modes,

WEP, WPA-Personal, WPA-Enterprise or None. WEP

is the original wireless encryption standard. WPA provides a higher level of security and WPA-Personal

does not require an authentication server. When WPA enterprise is enabled, the router uses EAP (802.1x) to

authenticate clients via a remote RADIUS server.

IP address of RADIUS server.

The port used for RADIUS server. The default port is 1812.

Key value shared by RADIUS server and this device.

Please refer to

Section 4 - Wireless Security for more information on security and encryption.

Click

Save Settings to save your changes, or click Don’t Save Settings to discard your changes.

Wireless Channel:

Visibility Status:

Security Mode:

Radius Server IP:

Radius Port:

Radius Shared Key: