D-Link DIR-455 User Manual

Page 24

Section 3 - Configuration

Fill in a name to indicate the following 3G

configuration.

(Optional) Fill in only if requested by ISP.

Enter the number to be dialed.

PAP, CHAP, or Auto detection. The default

authentication method is Auto.

(Optional) Enter the APN information.

Enter the PIN associated with your SIM card.

Auto or Manual. Connect to 3G network automatically or manually.

The time of no activity to disconnect established 3G session. Set it to zero or choose Auto in Reconnect Mode

to disable this feature.

(Optional) Fill in if provided by your ISP. If not, keep the default value.

Disable or Use LCP Echo Request. It depends on ISP requirement.

Activate this feature to change Ethernet WAN port to LAN port.

Click

Save Settings to save your changes, or click Don’t Save Settings to discard your changes.

Account/Profile Name:

Username:

Password:

Dialed Number:

Authentication:

APN:

PIN:

Reconnect Mode:

Maximum Idle Time:

Primary DNS Server:

Secondary DNS Server:

Keep Alive:

Bridge Ethernet Ports:

Choose this Internet connection if you already apply a SIM card for 3G Internet service from Telecom company. The fields here may not

be necessary for your connection. The information on this page is only be used when your service provider requires.