DR Power Tow-Behind 9.59 Premier (September 2014 - Present) - Manual (Page 26)

26 DR ® LEAF and LAWN
Converting to Cart Trailer Mode
Tools Needed:

5/16" Wrench

Two 3/4" Wrenches
 Flat Head Screwdriver

Safety Glasses
1. Remove the Rubber Bungee from the Hose Support (Figure 70).
2. Disconnect the Hose from the Impeller Housing using a 5/16" Wrench
(Figure 71).
3. Turn the Thumb Screw Clamp to disconnect the Hose from the Deck
Adapter (Figure 72).
4. Unhitch the Cable Link from the Enclosure (Figure 73).
5. Pull the Enclosure Sleeve from the Outlet Chute.
6. Remove the Hitch Clip from one end of the Hinge Pin and from the other
end pull the Hinge Pin from the Cart/Enclosure Hinge (Figure 74).
7. Lift the Enclosure from the Cart and set aside. For larger models this is a
good time to have a helper.
Hinge Pin
Figure 74
Hitch Clip
Enclosure
Before performing any maintenance, repairs or inspection, you must first shut
off the mower and leaf and lawn vacuum engines, wait five minutes for all
parts to stop and cool, and disconnect the spark plug wire of the leaf and lawn
vacuum.
Hose Clamp
Figure 71
Impeller
Housing
Inlet Hose
Figure 72
Deck
Adapter
Thumb Screw
Clamp
Inlet
Hose
Hose Cuff
Hose
Figure 70
Rubber Strap
Hose Support
Enclosure
Sleeve
Figure 73
Outlet
Chute
Cable Link