Tire pressure check – DR Power Tow-Behind 9.59 Premier (September 2014 - Present) User Manual
Page 21
CONTACT US AT www.DRpower.com 21
Tire Pressure Check
Tools Needed:
Tire Pressure Gauge
Air Compressor
1. Remove the Valve Stem Protective Cap (Figure 57) and check the tire
pressure with a Tire Pressure Gauge.
2. Check what the manufacturers recommended pressure is that is stamped on
the side of the Tire.
3. If the pressure is too low, add air through the Valve Stem with an air hose.
4. Replace the Valve Stem Protective Cap when finished.
Connecting the Battery Wire (Electric-Starting Models Only)
We ship all Electric-Starting systems with the Negative Battery Terminal Wire
disconnected. This prevents the Battery from discharging during shipment.
Before using your DR LEAF and LAWN VACUUM, you must connect the Battery
Wire.
1. Connect the Negative Wire to the Negative Post on the Battery by sliding the
Terminal onto the Battery Post (Figure 58).
Negative
Battery
Cable
Figure 58
Do not over inflate the tires. Inflate to the manufacturers recommended
pressure found on the tires.
Valve Stem
with Cap
Figure 57