DNF Controls Tally Manager - Manual (Page 8)

Page 8 of 16
5) Click the “Edit” link near the top of the Router Inputs web page.
6) For each Input, under the Source Type column, select “Unassigned”, “Fixed” or
“Dynamic.”
Fixed – Video source originates on this device.
Dynamic – Video source originates on another device.
NOTE: To set all Inputs to Fixed, press the “Set All to Fixed” button. This will affect
all Inputs on the router, not just those within the selected range.
7) If Fixed is selected, enter the System Source Name (SSN) for that Input, OR leave
the System Source Name field empty to use the System Source Name obtained from
the router. In the Alias column, select the Alias mode for that Input from the drop
down menu:
i. Disabled – No alias is allowed. Only the System Source Name will be
displayed on the UMD.
ii. Local – A local alias may be assigned to this Input on a monitor wall
that displays this Input. The alias will only affect the monitor wall
where it is configured.
iii. Global – A global alias may be assigned to this Input at the router. The
alias will affect all monitor walls that display this Input.
iv. Local Overrides Global – Local and global aliases may be assigned to
this Input. If a Local alias is assigned, it will override a Global alias
that has been assigned.