Operation, Lcd display, Transport control – DNF Controls ST304-Edit User Manual
Page 9: Cue points, Select a cue point, Mark/enter/edit a cue point, Operation 5, V. operation
V. OPERATION
A. LCD DISPLAY-
4- line x 20 characters
During normal operation, the top row of the display shows the selected time mode and current
time location of the selected VTR. The third and fourth rows of the display show the current Cue
Point number and its contents.
In EDITOR mode, the top row of the display shows the selected time mode and current time
location of the selected VTR. The remaining rows show current IN point, OUT point, and
duration of the selected VTR.
Time Modes - TM= Tape Timer TC= LTC VT= VITC
(Pressing [TIME MODE] will toggle through the different time modes.)
The currently selected SLO-MO speed is displayed on the far right side of the top row.
B. TRANSPORT CONTROL
Select the desired transport function by pressing the appropriate switch on the ST304.
The Real-Time Status Indicators will light to indicate the VTR's current tape transport mode.
For example: Pressing [PLAY] will put the Player into the PLAY mode.
The PLAY status Indicator will turn on when the VTR is in PLAY mode.
OR
Press [RECORD] + [PLAY] to put the Recorder into RECORD mode. (See SETUP MENU.)
The RECORD status indicator will turn on when the VTR is in RECORD Mode.
NOTE:
Check SETUP MENU prior to using the SLOW MOTION CONTROLLER to
confirm proper Record mode and other User settable modes.
C. CUE POINTS
1. Select a Cue Point
Press [NEXT CUE] or [LAST CUE] to step through the Cue Points.
OR
Manually enter the desired Cue Point number using the numeric keypad.
The current Cue Point number and its contents (IN point and OUT point) will be shown
on the second and third lines of the display.
2. Mark/Enter/Edit a Cue Point
Press [MARK] to mark the VTR’s time into the Cue Point IN point.
Press [IN] to mark the VTR’s time into the Cue Point IN point.
Press [OUT] to mark the VTR’s time into the Cue Point OUT point.
OR
Press [SHIFT]+[IN] to use the numeric keypad to enter an IN point.
OR, press [SHIFT]+[OUT] to use the numeric keypad to enter an OUT point.
Manually enter a time on the numeric keypad. Press [ENTER] to save the entered time.
The IN(OUT) indicator will turn on.
OR
S
S
T
T
3
3
0
0
4
4
-
-
E
E
D
D
I
I
T
T
&
&
S
S
T
T
3
3
0
0
4
4
-
-
E
E
D
D
I
I
T
T
-
-
T
T
,
,
S
S
l
l
o
o
w
w
M
M
o
o
t
t
i
i
o
o
n
n
C
C
o
o
n
n
t
t
r
r
o
o
l
l
l
l
e
e
r
r
5