DNF Controls ST304-Edit User Manual

Page 16

ST304 SETUP

Press Softkey beneath ClearCues to clear all Cue Points to 00:00:00:00.

Press Softkey [YES] when asked “Are You Sure?”

Press Softkey beneath SetDefault to set ST304 to default settings.

Press Softkey [YES] when asked “Are You Sure?”

DISPLAY SOFTWARE
VERSION

The version number for the currently installed software is displayed.

REFERENCE VIDEO

Press softkey to Enable/Disable Reference Video.

MARK-Q Press

Softkey

to:

Enable ADVANCE to next Cue Point when an IN point is marked or entered.

Maintain CURRENT Cue Point when when an IN point is marked or entered.

DROP

FRAME

Press Softkey to select DROP FRAME ON or OFF. Used to preset the VTR’s
Timecode Generator.

SEGMENT DURATION

Enter default segment duration. Used by Auto Mark Mode

AUTO MARK MODE

Press [ON] to enable this function-

When an IN point is marked or set, the OUT point will be calculated as IN point +

Segment Duration.

Press [OFF] to disable this function.

PREROLL VALUE

Enter Preroll value. This value is used by the PREROLL and editing functions.

RECORD DELAY

Used by editing functions. Enter the record latency, in frames, for the Recorder VTR

This latency is specified by the VTR manufacturer as the number of frames the VTR

requires to process a record command.

TCSOURCE Press

[MENU] to select RECORDER or PLAYER as time source during edit.

RECORDER is default and recommended setting.

VIDEO STANDARD

Press [PAL] or [NTSC] to select the desired video standard.

EDIT MODE

Press [MENU] to select EDIT MODE1 or EDIT MODE2. EDIT MODE 1 is
recommended

MODE1 - All IN & OUT marks will use Timecode as time type regardless of the
TIME MODE selection.

MODE2 - The currently selected TIME MODE will be used when marking IN &
OUT.

SET RECORDER VTR

Set the Recorder VTR to VTR1, VTR2, VTR3, or VTR4.

SET PLAYER VTR

Set the Player VTR to VTR1, VTR2, VTR3, or VTR4.

ST304 SETUP

Clear Cues

SetDefault