DNF Controls ST304-SRP - Manual (Page 9)

7 7 ST304-SRP & ST304-SRP-T, Slow Motion Controller
4. OPERATION
a. LCD DISPLAY
During normal operation, the top row of the display shows the selected time mode and
current time location of the selected Player. The second line shows the current time of
the Recorder.
For example: P 01:12:09:23
R 01:13:09:23 TC
Time Modes - TM= Tape Timer TC= LTC VT= VITC
The currently selected SLO-MO speed is displayed on the far right side of the
top row.
The bottom rows of the display shows the current Cue Point number and its
contents or the contents of currently marked IN and OUT points.
When IN & OUT LEDs are ON, the 3
rd and 4 th lines of the display show the
content of current IN & OUT. When IN & OUT LEDs are off and there is an
equal sign (“=”) between IN (OUT) and the Timecode, the 3
rd and 4 th lines of the
display show the content of currently selected cuepoint.
b. TRANSPORT CONTROL
Select the desired transport function by pressing the appropriate switch on the ST300.
The Real-Time Status Indicators will light to indicate the VTR's current tape transport
mode.
For
example: Pressing [PLAY] will put the Player into the PLAY mode.
The PLAY status Indicator will turn on when the VTR is in PLAY
mode.
OR
Press [SHIFT] + [RECORD] to put the Recorder into RECORD
mode. (See SETUP MENU.)
The RECORD status indicator will turn on when the VTR is in
RECORD Mode.
NOTE: Check SETUP MENU prior to using the SLOW MOTION
CONTROLLER to confirm proper Record mode and other User
settable modes.