DNF Controls ST304-SRP - Manual (Page 13)

1 1 1 1 ST304-SRP & ST304-SRP-T, Slow Motion Controller
b. STOP RECORD
1) Press [SHIFT] + [STOP] on VTR1 to stop recording on Record channel
connected to VTR3 connector of the ST300.
2)
The Record LED turns OFF.
3) Press
[SHIFT] + [STOP] on VTR2 to stop recording on Record channel
connected to VTR4 connector of the ST300 (if second DSR is connected).
4) The Record LED turns OFF.
NOTE: Most video servers do not allow to begin recording using the same clip
once the record has been stopped. A new clip must be created to go back into
record.
c. GO TO EE
Press [EE] key to go to Live video on the corresponding Playback Channel. The EE
LED turns on.
When EE light is ON, [MARK], [IN] and [OUT] keys mark the Recorder’s time code.
If EE LED is OFF, [MARK], [IN] and [OUT] keys mark the Player’s Time code.
d. GO TO LIVE
1) Press [REC] key.
2)
The Player searches to the current Recorder time minus user-defined INPUT
Video Delay. (See SETUP MENU.)
3)
The Player starts playing.