DNF Controls ST304-SRP - Manual (Page 10)

8 8 ST304-SRP & ST304-SRP-T, Slow Motion Controller
c. IN/OUT POINTS
1) Mark IN/OUT Point
Press [SHIFT] + [IN] to manually enter the time into the IN point. The IN LED
turns on.
Press [SHIFT] + [OUT] to manually enter the time into the OUT point. The
OUT LED turns on.
2) Delete IN (OUT) Point
Press [DEL] + [IN] ([DEL] + [OUT]).
The current IN (OUT) point is deleted.
IN (OUT) LED turns off.
3) GOTO
IN Point
Press [RECUE] to search to currently selected IN point.
d. SELECT A CUE POINT
Press [NEXT CUE] or [LAST CUE] to step through the Cue Points.
OR
Manually enter the desired Cue Point number using the numeric keypad.
The current Cue Point number and its contents will be shown on the second line of the
display.
e. SAVE A CUE POINT (AUTO MARK OFF)
AUTO MARK allows one-key marking of segments by automatically calculating the
OUT point. You can turn it ON/OFF in the SETUP MENU.
Press [IN] or [MARK] to save time into the IN Point of the current Cue Point.
If EE light is ON, Recorder’s time will be saved into the IN Point of the Cue Point.
If Advance option is set, time will be saved into the next Cue Point’s IN Point.
Press [OUT] to save time into the OUT Point of the CURRENT Cue Point.
If EE light is ON, Recorder’s time will be saved into the CURRENT OUT Point of the
Cue Point.
Note: In order to save an OUT point to the current Cue Point, the current Cue Point must
have an IN point saved FIRST