DNF Controls DMAT-AB - Manual (Page 9)

DMAT-AB Sports Controller for Abekas Mira Page 7 of 25
B. Press the {ASSIGN} softkey assign the highlighted multiple angle clip to
the CAM keys.
The same multi-angle clip gets assigned to all the CAM keys available in
the selected mode. The first angle of the clip gets assigned to CAM-1 key,
the second angle is assigned to CAM-2 key etc.
C. Press [ESC] to exit.
NOTE: In 1 IN / 1 OUT mode, only {CAM-1} is available. In 3 IN / 1 OUT
mode, {CAM-1}, {CAM-2}, and {CAM-3} are available. In 2 IN / 2 OUT mode,
{CAM-1} and {CAM-2 } are available. In 6 IN / 2 OUT mode, {CAM-1},
{CAM-2}, {CAM-3}, {CAM-4}, {CAM-5} and {CAM-6} are available.
6. ‘CLIP’ KEY ASSIGNMENT
Assign a pre-recorded clip to the {CLIP-X} softkey (ranging from {CLIP-1} to
{CLIP-3}). Press {CLIP-X} to instantly access the recorded video on the
playback channel.
A. Press [SHIFT] + {CLIP-X}
The current assignments are shown in the upper left portion of the display.
A list of clips available in Mira is displayed on the right side of the display.
B. Using the wheel, scroll through and find desired CLIP ID.
C. Press softkey {CLIP-X} to assign the highlighted clip to the {CLIP-X}
softkey..
D. Press [ESC] to exit.
NOTE: In 1 IN / 1 OUT mode, {CLIP-1}, {CLIP-2} and {CLIP-3} are
available. In 3 IN / 1 OUT mode, only {CLIP-1} is available. In 2 IN / 2 OUT
mode, only {CLIP-1} and {CLIP-2} are available. This function is not
available in 6 IN / 2 OUT mode.
7. LIVE/ RECORDED SOURCE SELECTION
Select the desired live source to view in EE mode, or recorded video to view in
PB mode as follows:
Press {CAM-X} to view the live source or recorded video on the assigned Mira
channel.
OR
Press {CLIP-X} to view the assigned pre-recorded clip.