DNF Controls DMAT-AB - Manual (Page 11)

DMAT-AB Sports Controller for Abekas Mira Page 9 of 25
The IN point HH:MM:SS is assigned as the default Clip Label.
D. Press [DEL] + [IN] to clear the IN point.
E. Press [DEL] + [OUT] to clear the OUT point.
9. RECALL CLIP
A. Press [UP ARROW] to highlight the next clip in the clip list portion of the
display.
B. Press [DOWN ARROW] to highlight the previous clip in the clip list portion
of the display.
C. In CP mode, Clips are automatically loaded as they are highlighted. In all
other modes, RECALL CLIP must be pressed to load the clip.
OR
Manually enter a clip number using the numeric keypad, and then press
[RECALL CLIP] to recall the selected clip.
NOTE- If a 1, 2, or 3-digit number is entered, the clip number in the range
corresponding to the playback channel’s currently selected source (CAM-A,
CAM-B, CAM-C, or CLIP) will be recalled.
10. TRIM EXISTING CLIP
Mark a new IN point, new OUT point, or new IN & OUT point.
A. Recall an existing clip.
B. Use transport keys to locate a new IN point.
C. Press [IN] to mark the new IN point.
D. Use transport keys to locate desired OUT point.
E. Press [OUT] to mark the new OUT point.
F. Press [SAVE CLIP] to replace the original clip with the trimmed clip.
OR
Manually enter clip number using the numeric keypad, and then press
[SAVE CLIP] to save trimmed clip in the entered clip number.
OR