DNF Controls DMAT-AB - Manual (Page 16)

DMAT-AB FUNCTIONALITY OVERVIEW
Press {CAM-X} to instantly switch between input sources on Mira
channels A, B, C, D, E or F .
Press {CLIP-X} to instantly exit EE mode and load assigned, pre-
recorded clip for playback. Clip will load and pause at first frame of video.
Press [RECALL CLIP] to exit EE mode and load selected clip for playback.
Press [LIST] to exit EE mode and load selected highlight list for playback.
EE MODE:
Move T-bar or press any transport key to exit EE mode and go to PB
mode.
Press {CAM-X} to instantly switch between playback sources from Mira
channels A, B, and C. (The current playback time does not change when
switching between CAMs.)
If {CLIP-X} was previously selected, CAM-A, CAM-B, or CAM-C will load
and pause at first frame of video.
Press {CLIP} to load the assigned, pre-recorded clip for playback. Clip
will load and pause at first frame of video.
Press [RECALL CLIP] to exit PB mode and load selected clip for playback.
Press [LIST] to exit PB mode and load selected highlight list for playback.
PB MODE:
Press [REC] to exit PB mode and view live source of selected CAM
Press {CAM-X } to load the associated angle for the current clip number.
The clip will load and pause at its IN point.
Press {CLIP-X} to exit CP mode and load the assigned, pre-recorded clip
for playback. Pre-recorded clip will load and pause at first frame of video.
Press [RECALL CLIP] to load selected clip for playback.
Press [LIST] to exit CP mode and load selected highlight list for playback.
CP MODE:
Press [REC] to exit CP mode and view live source of selected CAM
Press [RECALL CLIP] to exit PL mode and load selected clip for playback.
PL MODE:
Press [REC] to exit PL mode and view live source of selected CAM