DNF Controls DMAT-AB - Manual (Page 24)

AUTO-MARK
HEAD
Enter a timecode number between 00:00:00:00 and 23:59:59:29
Default – 00:00:05:00
Set value to 00:00:00:00 for both AUTO-MARK HEAD and AUTO-MARK TAIL
to disable Auto Save.
AUTO-MARK
TAIL
Enter a timecode number between 00:00:00:00 and 23:59:59:29
Default – 00:00:05:00
Set value to 00:00:00:00 for both AUTO-MARK HEAD and AUTO-MARK TAIL
to disable Auto Save.
CAM KEY IN
CP
Select {SWITCH ANGLE ONLY} OR {CUE TO IN AND PLAY}
Default – SWITCH ANGLE ONLY - defines the description of the controller
when the clip is in CP mode and is playing at regular or variplay speed.
TRANSITION Select {CUT}, {MIX}, {H-WIPE}, or {V-WIPE}.
Default – CUT for 1 IN / 1 OUT and 3 IN / 1 OUT. MIX for 2 IN / 2 OUT and
6 IN / 2 OUT.
TRANSITION
DURATION
Enter a Transition Duration between 0 – 98 frames
Default – 5 frames
VIDEO
REFERENCE
Select {ON} or {OFF}
Default – ON
MARK AUTO
ADVANCE
Select {ON} or {OFF}
ON: Upon pressing [SAVE CLIP] the clip number will automatically
advance.
OFF: Upon pressing [SAVE CLIP] the clip number does not advance. The
operator must manually select a different clip number.
SAVE CLIP Select {ON} or {OFF}
ON: The IN and OUT point for the selected clip number are saved only when
the operator presses [SAVE CLIP].
OFF: In EE and PB modes, when the IN key is pressed, the OUT point is
automatically calculated using the Auto-Mark Tail setting. When the OUT
key is pressed, the IN point is automatically calculated using the Auto-Mark
Head setting. In CP mode, press IN to save the current position as the IN
point, or press OUT to save the current position as the OUT point for the
selected angle.
STOP AT OUT Select {ON} or {OFF}
ON: In CP mode, the clip will stop playing when the OUT point is reached.
OFF: In CP mode, the clip will continue playing when the OUT point is
reached, and the time display will display a negative number when the OUT
point is passed.
AUTO-GANG
WITH REC
Select {ON} or {OFF}
When enabled during any 2-OUT operating mode, playback channels are
automatically put into gang when the [REC] button is pressed.
Default - OFF