Learn – DNF Controls 4000CL-AX User Manual
Page 5
5
5
400 Clip Fast Access System, Accom Axess Protocol
5. LEARN
1.
Select a VTR by pressing VTR [1], VTR [2], VTR [3] or VTR [4]
2.
Load the desired Clip using the Clip List function.
a. Press
[CLIP LIST] to view the list of Clips that exist
in the VIDEO SERVER.
b.
The first line will show: “Enter starting point”
The second line will show the numeric ID of the currently loaded clip.
c.
Turn the wheel to scroll through the Axess clips starting from the currently
displayed clip
OR
d.
Enter the numeric ID (1-9,999,999) using the numeric keypad. The Axess
will load the entered CLIP ID or go to the next available ID if the entered
ID does not exist. You will see the CLIP ID changing as the Axess tries to
find the next available ID. You can terminate the search by hitting any
key and entering a new starting point.
3.
Turn the wheel. The top line of the display will show “xxxxxxx y”
Where “xxxxxxx” is the numeric CLIP ID, y= ‘S’ if it is a Still, or ‘C’ if it is a
clip. Turn the wheel to scroll forward through the list of available clips.
4. Press
[LOAD] to load the current CLIP ID shown on the top line of the display.
5.
Locate the clip to the desired IN time.
6.
Repeat steps 1 – 5 until clips are loaded into the desired VTRs
7.
Set the GANG mode, if required.
8. Select
the
desired
Cue Point by pressing [NEXT CUE], [LAST CUE] or by
manually entering the Cue Point using the numeric keypad.
The selected Cue Point number is shown on the bottom line of the display.
9. Press [SHIFT] + [MARK] to start the LEARN.
10.
The first line of the display will show “Select VTRs:”
the second line of the display will show “Mark-Lrn, ESC-cancel”.
11.
Press VTR [1], [2], [3] or [4] to select the VTR you want to learn into the current
Cue Point. If the VTRs are GANGED, select one VTR that is part of the Gang.
The rest of the Gang will learn automatically.
The first line of the display will show you the VTR number you have chosen.
12. Press
[MARK] to complete the LEARN
OR
Press [ESC] to exit without LEARNING.
The ST300 will: LEARN (save) the VTR Number (1,2,3,4), loaded CLIP ID and current
IN time to the selected Cue Point.