Diamondback Fitness 900Er - Manual (Page 31)

900Er Owner’s Manual
31
ƒ The brickyard will display the program profile, while the first column will flash to indicate the user’s progress in the
current program.
ƒ If a heart rate is detected, the heart (♥) symbol will flash and the Heart Rate Graph will display the current percentage
of the user’s maximum heart rate. The calculations for the user’s heart rate target will be based upon the user data
entered in the setup mode. Please ensure these values are correct for the current user.
ƒ The LED lamp above the DATA DISPLAY key will be lit indicating the information currently displayed in the
Messaging/Data Display window is Time, Level, Pulse and Calories. Pressing the DATA DISPLAY button once will light the
LED lamp below the key to indicate RPM, Speed, Distance and Watts are being displayed in the Messaging/Data Display
window.
ƒ The user may change the resistance level during the program. “Intensity Level =” will be displayed for two (2) seconds in
the Messaging/Display window to confirm the selection when the UP or DOWN keys are pressed.
ƒ When thirty (30) minutes have elapsed or the STOP/START‐QUICK START key is pressed the Quick Start program will
end and the Workout Summary mode will launch. Pressing the STOP/START‐QUICK START key will restart the Quick
Start program. See the section entitled Workout Summary on page 29 for more information.
See section entitled Operating Notes (page 26) for more information regarding the Pause, Reset and Program Reset functions.
CLASSIC PROGRAMS
All Classic Programs offer identical setup and data entry. Once the desired program has been selected, jump to the section
entitled Classic Programs Setup Mode or Classic Programs Launch below.
Manual Program
Overview. The Manual program offers the user the ability to build a customized workout profile on‐the‐
fly, during the workout.
Selecting. From the Idle mode, press the MANUAL program button. The LED indicator above the button
will light and “Manual” will be displayed in the Messaging/Data Display field.
ƒ Press ENTER to launch Setup mode (see section titled Classic Programs Setup Mode below), or