Diamondback Fitness 900Er - Manual (Page 26)

26
English Unit Mode and Metric Unit Mode
The default unit setting for the console is the English or standard system. To toggle between the English and metric units modes,
press and hold the ENTER key for two (2) seconds during Idle mode. The Message/Data Display window will display “Self Test.”
Press the UP or DOWN keys until “Units Setup” is displayed, and press the ENTER key. “English” or “Metric” will display to
confirm the current setting. If an adjustment is desired, select via the UP/DOWN keys. Press and hold the ENTER key to accept
the displayed setting. The console will return to the Idle mode.
Console Alert Sound Settings
The 900Er allows the user to switch off the audible messaging delivered by the console. To turn the sound off, press and hold the
ENTER key for two (2) seconds while in the Idle mode. The Message/Data window will display “SELF TEST.” Scroll through the
menu with the UP/DOWN keys until the “Sound Setup” is displayed, and press ENTER. “Sound On” or “Sound Off” will display to
confirm the current setting. Scroll between the two options with the UP/DOWN keys until the desired setting is displayed,
pressing the ENTER key to accept the new setting and return to the Idle mode.
Operating Notes
Power On and Off When the AC adapter is plugged into the unit, all displays on the console will light to confirm power
has reached the unit. The console will power down after five (5) minutes.
Power Save Mode In the power save mode, press any key or move the step arms to wake up the console and begin
operation.
Reset To reset a program during operation, press and hold the STOP/START‐QUICK START key for two (2)
seconds. When the program resets, the console returns to the idle mode.
Pause and Resume You may interrupt or pause a program for up to five (5) minutes during a workout before the
console will reset. To pause the program, simply stop pedaling. The Messaging/Data Display
window color will change from blue to orange, flash “Pause” then alternate with the data
accumulated thus far. To resume the paused program, simply start pedaling before the five (5)
minute pause mode times out.